Follow this tutorial to the letter or risk bricking your console!
We are not responsible if you brick your console or do anything other than Rebug is intended for.
If you do happen to brick your console you will still be able to fix it with Service Mode… You have been warned!
**USE AT YOUR OWN RISK**
** You must be on Firmware 3.41 **
** YOU WILL BRICK (RECOVERABLE) IF YOU ARE NOT ON 3.41 **
This is a (3) part tutorial
Password to extract is http://rebug.me
Ok Lets Get Started
Part 1:
1. Copy the Rebug folder over to a USB stick
2. Jailbreak your console with PSGroove 1.1 You can find it at http://rebug.me
3. Install Comgenie Awesome Filemanager v6
4. Install Mount Alejandro
5. Load Mount Alejandro and press O (It will return to XMB)
6. Load Comgenie Awesome Filemanager
7. Enter the dir dev_Alejandro on the LEFT side
**WARNING** At this point you can brick your console if you are not careful!
8. Press Select
9. Delete the directories listed below by pressing [] then Start
:::::::::::::::::::::::
data
ps1emu
ps2emu
pspemu
sys
vhs
:::::::::::::::::::::::
10. Open your USB stick on the RIGHT side and enter the Rebug directory
11. Copy over each directory by pressing O then Start
12. After all of the directories are copied to dev_Alejandro power down the console by holding down the ‘Power’ button
13. Install the Rebug 3.41E Payload on your jailbreak device. You can find it at http://rebug.me
14. Jailbreak your PS3 and enjoy your new Rebugged console!
Part 2: (Optional for the Rebug 3.41E Beta 1.0.1 PUP release. Users of the Rebug 3.41E Beta 1.0 dev_flash pack continue to Part 3)
Unfortunately in the Rebug 3.41E Beta 1.0.1 PUP release the extra debug menu is not installed as PUP packing had only just started and we didn’t want to mess with the folder structure quite yet. However this does not mean you can not install it yourself.
3.You will need to run Mount Alejandro or Waninkoko’s Firmware Flash tool (See tutorial for how to use)
4.Then run Comgenie’s Awesome Filemanager
6.In this directory you will find two folders ‘debug_menu1′ and ‘debug_menu2′
7.Copy these two folder to ‘dev_Alejandro/vsh/rebug’
8.Now you can follow Part 3 of the tutorial to swap debug menus.
Part 3:
This allows to swap between Rebug’s two different ‘Debug Settings’ menus (you can swap between debug_menu1 and debug_menu2)
1. Jailbreak your console with any Rebug 3.41E payload.
2. Load Mount Alejandro and press O (It will return to XMB)
3. Load Comgenie Awesome Filemanager
4. Enter the dir ‘dev_Alejandro/vhs/module/’ on the LEFT side
5. Enter the dir ‘dev_flash/vhs/rebug/debug_menu2′ on the RIGHT side
**WARNING** At this point you can brick your console if you are not careful!
6. Press Select
7. Select sysconf_plugin.sprx and press O then start
8. Hold the PS button down and Quit Game
9. Go have a look at all the new Debug option =)
If you want to swap back to debug menu 1 follow the directions above and enter debug_menu1 instead.
Slot 1